Slipstream Engineering Design Ltd is located in Shipley, West Yorkshire in the UK. Approximately 10 miles west of Leeds, we are easily reached by plane, train or car and are very near to Salts Mill in Saltaire.
If travelling by plane, the nearest airport is Leeds/Bradford International (LBA) which is located approximately 7 miles from the Slipstream Design office. The journey from Leeds Bradford International Airport takes approximately 25 minutes by car or taxi.
Slipstream Design is located within walking distance from both Shipley (5 minutes) and Saltaire (15 minutes) train stations.
If arriving at the Shipley train station, take the exit sign posted Station Road. Walk north on Station Road towards Otley Road/A6038. Once you have reached the end of the road, cross over the road towards Barclays Bank. Cross again towards Shipley Central Taxi Services. Walk a short distance along Otley Road/A6038 until another set of traffic lights with Water Sports Centre in front of you. Cross the road and walk down and take the first left onto Wharf Street. Bear right for approximately 367ft. Slipstream Design is situated in Block D next door to Workouts Health Club, through the first set of stairs and on the left hand side.
If arriving at Saltaire train station, exit the station onto Victoria Road. Cross the road and take the steps down to Salts Mill. Following the cobbled road in front of the mill, walk past All Terrain Cycles, The Early Music Shop and then onto Salts Mill Road. Follow this road past the main Salts Mill car park until you reach the first right (Ashley Lane) before the bridge over the canal. Take this right and walk to the end of this road. Turn left onto Victoria Street and cross the road across onto Wharf Street. Bear left and Slipstream Design is situated in Block D opposite Country Feeds (pet shop), through the first set of stairs and on the left hand side.
Slipstream Design is located near Salts Mill and Saltaire, a world heritage site which is well sign posted with brown signs.
From the M62 / Bradford
Take the M606 at Junction 26 to Bradford. Follow the signs to Bradford and then Shipley along the A6037 (Canal Road). As you reach Shipley follow the brown signs to Salts Mill past the railway station onto the A6038. Pass straight over the main junction in Shipley, crossing over the canal down the hill. At the Noble Comb pub take a left turn onto Salts Mill Road. Follow this road and take the first left at the roundabout onto Victoria Street. Take the first left again onto Wharf Street and Slipstream Design is situated in Block D opposite Country Feeds (pet shop), through the first set of stairs and on the left hand side.
Free parking is available on the first sharp left to the car park. However the car park can get busy. If there are no available spaces please ring Slipstream Design on 0113 815 0046 so we can direct you towards additional parking.